The following clamps will enable you to safely secure your bullet camera or camcorder / digital camera to many surfaces. If you do not find what you are looking for then please also look at the 'sucker mounts' page, or feel free to contact us to discuss your requirement.
Please see our Filming / Race Guide for more information on rules and regulations on camera mounts for competition and road use. Many of our clamps are suitable for competition use however the onus is on the operator/competitor to ensure this is the case before using the equipment.
EZ Mount 2.2 to 2.85cm
EZ Mount 3.2 to 5.1cm
Clamp and Table Tripod
ClampMount with Swivel Head
Headrest Mount
Headrest Mount - Double
Mini Clamp
Mini Clamp and Spigot
Mini Clamp and Short Extension Arm
Neat Roll Cage Mount
Super Clamp
Super Camp and Camera Stud
Super Clamp and Short Extension Arm
Super Clamp and Flex Arm
Super Clamp and Long Extension Arm
Super Clamp and Heavy Duty Flex Arm
Super Clamp with Stud and Socket (Swivel) Head
Super Clamp with Stud and Tripod Head
U Bolt Ram Mount
Universal Clamp Mount
Universal Clamp with Ball and Socket
Mini clamp that can grip small objects and bars up to 35mm in diameter
PROS |
CONS |
Ideal for using in small spaces |
Can only grip onto small objects. |
Mini Clamp and Spigot - £18.10
Mini clamp and double ended spigot. Mini clamp can grip onto objects up to 35mm in diameter
PROS |
CONS |
Ideal for using in small spaces |
Can only grip onto small objects. |
Versatile clamp, with rubber jaws, will clamp to almost anything between 13mm and 55mm. Ideal for fitment to roll cages and even to headrest posts. Requires additional accessories to allow the fitment of a camcorder - see other super clamps in this section of the shop, or the mount accessories section. Made from aluminium alloy, it is rated to hold up to 15kgs in weight
PROS |
CONS |
Very versatile. |
(this mount requires other accessories) |
Clamp and Table Tripod - £23.26
Clamp and mini tripod. Clamp opens up to 4cm maximum. Legs for mini tripod are stored within the clamp. Ball head allows for adjustment of angle.
Mini Clamp and Short Extension Arm - £26.50
Mini clamp, 12cm extension arm and double-ended spigot. Mini clamp can grip onto objects up to 35mm in diameter.
Extension arm has a cylindrical end, allowing good adjustment for angle
PROS |
CONS |
Ideal for using in small spaces |
Can only grip onto small objects. |
Super clamp combined with a double-ended camera stud in 1/4" and 3/8" threaded size. Best suited to mounting a bullet camera to a roll bar or headrest post
PROS |
CONS |
Very good value |
Lack of adjustment. |
Very small, but strong roll cage mount, secured with two jubilee clips.
Ideal for anyone wanting a small mount for bullet cameras and small cameras and camcorders.
The ball and socket head gives plenty of adjustment for most angles. The jubilee clips adjust to fit most common size of roll cage
PROS |
CONS |
Very small |
Small ball and socket won't support heavy cameras |
Super Clamp and Short Extension Arm - £41.32
Super clamp combined with a 120mm extension arm. At the end of the arm is a reversible spigot to allow the mounting of a bullet camera or camcorder.
The shorter extension arm has an advantage of its longer version, as it has a cylindrical end that allows you to twist the arm in the clamp before tightening. This allows you to finely adjust the angle
PROS |
CONS |
Price |
Less adjustment when compared with a double ball socket |
Super Clamp and Flex Arm - £37.23
The Super clamp combined with a flexible arm. This strong, flexible arm can be manipulated into many different positions to get the perfect angle.
55cm long, 12 mm diameter with hexagonal end to fit the super clamp perfectly. Has a 1/4" male thread and 3/8" female thread. Best suited for lighter camcorders and bullet camcorders
PROS |
CONS |
Allows for great adjustment. |
This long arm puts extra leverage on the super clamp, requiring a good, firm mounting position |
A mount that is frequently used on motorbikes, where it can attach to handlebars and in some cases on grab handles.
Will attach to 1" diameter bars, and being finished in stainless steel will resist weathering well.
Comprises of the U bolt, 3 or 6-inch extension arm (please let us know which you prefer) and a camera platform with 1/4" thread
PROS |
CONS |
Neat mount, taking up little bar space. |
May not fit many bikes with crowded bars or box section yokes |
Super Clamp and Long Extension Arm - £40.98
Super clamp combined with a 195mm extension arm. At the end of the arm is a reversible spigot to allow the mounting of a bullet camera.
This longer extension arm has a hexagonal end, allowing for a solid grip within the super clamp.
PROS |
CONS |
Price |
As the extension arm is rigid it allows only limited options for aiming the camera in the right direction, relying mostly on the angle of the clamp and the surface you mount to. |
EZ Mount 2.2cm to 2.85cm - £42.59
A simple but very effective mount, built in high quality materials. Ideal for roll cages, also suitable for mounting on other vehicles i.e. handlebars, frames and shock absorbers!
Includes rubber sheet to dampen vibration and reduce the chance of any scratches, stainless steel jubilees and black anodised alloy knuckle.
We have fitted a number of these to race and rally cars
PROS |
CONS |
Very strong, capable of supporting even full size camcorders. |
Best if you can have the help of another person when fitting, as it's a little fiddly. |
Super Clamp and Heavy Duty Flex Arm - £42.17
The Super clamp combined with a heavy-duty flexible arm. This very strong, flexible arm can be manipulated into many different positions to get the perfect angle. 55cm long, 18 mm diameters with hexagonal end to fit the super clamp perfectly. Has a 1/4" male thread and 3/8" female thread. Will hold medium and large consumer camcorders.
PROS |
CONS |
Allows for great adjustment |
This long arm puts extra leverage on the super clamp, requiring a good, firm mounting position. |
Clamp Mount with Swivel Head - £45.17
Clamp mount with rubber 'jaws' to help grip and slightly reduce vibration.
Strong grip, has been tested on modern fighter jets!
Opens out to a maximum of 4cm, or will close up to grip onto your open car window.
Plenty of adjustment for angle, great for bullet cameras and light camcorders
Gives a maximum reach away from the roll bar of 10cm.
All nylon construction, strong and relatively lightweight
Universal Clamp Mount - £45.24
A versatile clamp, whose two clamping arms can be reversed, to push as well as clamp together. Can be used on round, square and irregular angled items, can clamp up to 80mm items.
Has two 1/4" threaded mounting points for cameras
PROS |
CONS |
Versatile |
A little crude in construction, not the finest looking clamp out there! |
Compact Cage Mount for Bullet Cams (Without Camcorder Base) - £45.24
A neat and compact roll cage mount, held in place securely using a jubilee clip.
Suitable for small camcorders, but particularly bullet cameras, this mount has plenty of adjustment, using two ball joints. This mount has no camcorder platform, making it neater looking and more streamlined than the regular compact cage mount
PROS |
CONS |
Lightweight |
Not quite as strong or as stable as the mounts we sell using two jubilee clips |
Super Clamp, Stud and Socket Head - £45.63
The Super clamp, camera stud and ball and socket head combine, to give a good value, strong roll cage mount with some adjustment for angle.
Suitable for bullet cameras or small camcorders. Please see individual items for more
High quality headrest mount, for seats with pillars.
Silver or black anodised finish.
Camcorder is well supported with the usual screw mount, plus a rubber cradle rest and a nylon quick release strap that goes around the camera.
FMVSS American standard crash tested.
Will fit to both driver and passenger headrests (and rear head rests where applicable).
This headrest mount will easily clamp to any vehicle that uses headrests that mount on posts and raise up a minimum 3cm to provide clearance for the mount frame. The area to the sides of the headrest posts must be clear. If you can place a straight 38cm long stick against your headrest posts, the mount will work fine
Super Clamp with Stud and Tripod Head - £60.75
Super clamp combined with a stud and tripod head.
See individual descriptions for more details, but essentially this mount combines the high strength of the super clamp, with the wide platform of the tripod head. Ideal for medium or small camcorders attached to a roll bar.
PROS |
CONS |
Great value |
Not as good for bullet cameras, due to the rubber base and screw thread arrangement |
Superclamp with double ball tilt head - £62.04
The Super clamp (see individual description) combined with a double ball tilt top head. Allows a large degree of adjustment to get the angle of shot just right. Comes with a standard 1/4" screw fitting
PROS |
CONS |
Large degree of adjustment. |
Slightly heavy |
Universal Clamp with Ball and Socket - £64.63
Combining the universal clamp and a ball and socket for greater adjustment of angle of the camera.
See individual descriptions of both items
PROS |
CONS |
A lot more flexibility of positioning. |
The weight the mount will hold will mostly be dependant on what you choose to grip it onto. |
Race Ready Super clamp and Head - £67.21
The same Super clamp and double ball tilt top head, combined with a safety strap as required to pass scrutineering for many race series.
This mount is used in rallying, circuit racing, sprinting and hill climbing very successfully
PROS |
CONS |
Large degree of adjustment. |
Slightly heavy |
Clamp Magic - £71.09
Best used in situations when use of a tripod isn't possible. Will grip onto fences, railings, branches etc.
It has an extendable column (up to 32cm above the surface being gripped) and a ball and socket on the end
PROS |
CONS |
Versatile range of uses |
This clamp is really too heavy and large to be of real use for on board filming, except when gripping something thick. |
Superclamp and Magic Arm with Camera Bracket - £102.11
Superclamp combined with the locking magic arm.
The single friction wheel (not the lever as pictured) in the middle of the magic arm controls all 3-pivot points at the same time.
When at full reach it measures 530mm, allowing the camera to reach some very unusual angles. Particularly useful for gaining shots in the cockpit when attached to the roll bar or headrest. Allows some great footage when attached to a motorbike or mountain bikes handlebar. Magic arm will support a maximum of 3 kgs.
PROS |
CONS |
Hugely versatile. |
The further away from the clamp the camera is mounted the greater the chance of vibration affecting the picture |
Race Ready billet Mount - £113.75
Solid cnc alloy mount, complete with safety strap and mount.
Large rubber pad and base to aide vibration damping.
Will mount onto roll bars between 1 1/4" (32mm) and 2" (51mm) in diameter. A high quality mount with a black anodised finish.
Double Headrest Mount - £115.03
Very stable headrest mount, which mounts onto both driver and passenger headrest pillars for maximum stability.
Has enough adjustment to allow both seats to be reclined at different angles.
Includes a safety strap, which makes it even better for track day and sprinting use.
Fitment is very quick and easy, with no tools needed.
Lightweight alloy with a black anodised finish
Frequently used and seen in race and track cars with roll cages.
It is firmly bolted at 4 points, and goes around your roll cage, on a diagonal, vertical or horizontal bar.
Includes a security strap that fulfils SCCA regulations, and helps with MSA scrutinizing as it provides a secondary safety measure in the event of an accident.
The head of the unit is actually a re-branded Manfrotto tripod head, so it gives plenty of adjustment, and a smooth, fluid action.
The base has an elastomer bushing that reduces a little vibration from getting to the camcorder.
PROS |
CONS |
Very strong |
Quite expensive |